Briggs & Stratton 7800950-00, Руководство оператора, Страница: 12 / 76

Not for
Reproduction
12
How To Adjust The Operator Seat
With the engine stopped:
1. Raise the operator seat.
2. Loosen the two adjusting knobs (
A , Figure 6) and
move the seat to the desired position. After adjustment,
tighten the knobs securely.
3. Lower the operator seat.
A
Figure 6
How To Add Fuel
WARNING
Fuel and its vapors are extremely flammable and
explosive. Fire or explosion can cause severe burns or
death.
When Adding Fuel
• Turn engine off and let engine cool at least 5 minutes
before removing the fuel cap.
• Fill fuel tank outdoors or in well-ventilated area.
• Do not overfill fuel tank. To allow for expansion of the
fuel, do not fill above the bottom of the fuel tank neck.
• Keep fuel away from sparks, open flames, pilot lights,
heat, and other ignition sources.
• Check fuel lines, tank, cap, and fittings frequently for
cracks or leaks. Replace if necessary.
• If fuel spills, wait until it evaporates before starting
engine.
1. Clean the fuel cap area of dirt and debris. Remove the
fuel cap ( A , Figure 5).
2. Fill the fuel tank with fuel. To allow for expansion of the
fuel, do not fill above the bottom of the fuel tank neck
( B ).
3. Reinstall the fuel cap.
B
A
Figure 5