Briggs & Stratton 40213, Руководство по обслуживанию и устранению неисправностей

Страница: 53 / 76

Service & Troubleshooting Guide - Home Generator System - Models 040213 & 040234 (15Kw)
Section 3 - Unit Disassembly Information
Page 53
3
SECTION 3 - UNIT DISASSEMBLY
NOTE
: Prior to unit disassembly, the unit must
be turned
OFF
, the 15 Amp fuse removed,
UTILITY power must be removed and the fuel
system should be turned
OFF
.
REMOVING THE ACCESS DOORS
1. Unlock door (Fig. 46).
Fig. 46 - Access Door Removal
2. Open door and lift from hinges .
3. Repeat for the remaining two doors.
REMOVE THE ROOF ASSEMBLY
The roof assembly is attached to the bulkheads on both
sides, as shown in (Fig. 47).
Fig. 47 - Roof Removal
REMOVE THE EXHAUST BULKHEAD
The exhaust bulkhead is secured to the base of the
standby generator with four self-threading bolts (Fig.
48).
Fig. 48 - Exhaust Bulkhead Removal
1. Remove the four bolts.
2. Lift the exhaust bulkhead from the floor of the
generator enclosure (Fig. 49).
Fig. 49 - Exhaust Bulkhead