Briggs & Stratton 355ZB2444 Скачать руководство пользователя | Manualshive

Страница: 28 / 48

background image

26

www.simplicitymfg.com | www.snapper.com

Figure 23. Tightening the Mower Blade for
Installation
A. Mower Blade Mounting Bolt
B. Hex Washer (44”, 50” & 54” Models Only)
C. Mower Blade Air Lift (Install With Points Up)
D. 4 X 4 Wooden Block
E. Spring Washer

D

A

B

E

Sharpening the Mower Blade

1. Sharpen the mower blades with grinder, hand file,

or electric blade sharpener.

2. Sharpen the mower blade by removing an equal

amount of material from each end of the mower
blade.

3. Keep the original bevel (A, Figure 21) when

grinding. DO NOT change the mower blade bevel.

4. The mower blade should have a maximum 1/64”

(0,40 mm) cutting edge (B) or less.

5. Balance the mower blades before installing.

Balancing the Mower Blades

1. Clean the mower blade to remove any dried grass

or other debris.

2. See Figure 22. Put the mower blade on a nail in

a vise and turn the mower blade to the horizontal
position.

3. Check the balance of the mower blade. If either

end of the mower blade moves downward,
sharpen the heavy end until the mower blade is
balanced.

See Sharpening the Mower Blades

for

proper sharpening instructions.

4. Repeat the process until the mower blade remains

in the horizontal position.

Reinstalling the Mower Blades

1. Reinstall each mower blade with the air lifts

pointing up towards the mower deck as shown in
Figure 23. Wedge a wooden block between the
mower blade and the mower deck housing, and
secure the mower blade with the mower blade
mounting bolt, hex washer and spring washer
(A, B & E, Figure 23) and torque to 45-55 ft. lbs.
(61-75 Nm).

CAUTION

Avoid injury! Mower blades are sharp.

• Always wear gloves when handling the mower

blades.

• Always wear safety eye protection when

grinding.

CAUTION

Avoid injury! Keep mower blades balanced.

• An unbalanced mower blade can create

excessive vibration and damage the unit or
cause mower blade failure.

A

B

Figure 21. Sharpening the Mower Blade
A. Mower Blade Bevel
B. Mower Blade Cutting Edge

Figure 22. Balancing the Mower Blade
A. Nail

A

WARNING

For your personal safety, each mower blade
mounting bolt must be installed with a hex/
spline washer and spring washer, then
securely tightened. Torque mower blade
mounting bolt to 45-55 ft. lbs. (61-75 Nm).

Regular Maintenance

Not

for

Reproduction

«
...
26
27
28
29
30
...
»

Содержание 355ZB2444

















































Отзывы:

Нет отзывов

Похожие инструкции для 355ZB2444

Бренд: Land Pride Страницы: 62

135 B TITAN DOD

Бренд: Stiga Страницы: 100

Бренд: Brill Страницы: 96

Бренд: Dolmar Страницы: 76

Бренд: Wolf Garten Страницы: 183

Бренд: Agria Страницы: 48

Super Recycler 20797

Бренд: Toro Страницы: 24

Бренд: Exmark Страницы: 5

Бренд: Exmark Страницы: 20

Бренд: White Outdoor Страницы: 38

04018 Greensmaster Flex 18

Бренд: Toro Страницы: 40

Бренд: Viking Страницы: 498

Бренд: Kiva Страницы: 36

Бренд: Scheppach Страницы: 76

Бренд: Kubota Страницы: 85

Бренд: Scheppach Страницы: 112

Бренд: Yard force Страницы: 25

Бренд: Toro Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды