11
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to
store your spray gun, nozzle extension, turbo nozzle, and
ProjectPro™ nozzles.There is also a hook at the front of
the accessory tray to hold your high pressure hose.
NOTE: The extra hole in the tray is for storing a utility
brush.The brush is NOT included with your pressure
washer.You can buy the brush as an optional accessory.
1.
Place nozzle extension through hole on accessory tray,
as shown in Figure 12.
2.
Place spray gun through hole on accessory tray on
right side of unit (Figure 12).
3.
Push turbo nozzle up and into clip on accessory tray
until it snaps in, as shown in Figure 12.
4.
Hang high pressure hose on hook attached to accessory
tray on front of tray, as shown in Figure 12.
How to Use ProjectPro™ Nozzle
System
The quick–connect on the nozzle extension allows you to
switch between four different ProjectPro™ system nozzles.
The ProjectPro™ nozzles vary the pressure and spray
pattern as shown (Figure 13).
Follow these instructions to change ProjectPro™
nozzles:
1.
Engage trigger lock on spray gun.
2.
Pull back collar on quick–connect and pull current
ProjectPro™ nozzles off. Store ProjectPro™ nozzles in
holder provided on the accessory tray.
3.
Select desired ProjectPro™ nozzle:
•
For delicate rinse (lower pressure and higher
flow), for gentle cleaning of cars/trucks, boats, RV’s,
patio furniture, lawn equipment, etc., select yellow
Delicate ProjectPro™ nozzle (Figure 14).
•
For general rinsing (medium pressure and medium
flow), ideal for most all purpose cleaning such as
home siding, brick patios, wood decks, driveways
and sidewalks, garage floors, etc., select orange
General ProjectPro™ nozzle (Figure 15).
Figure 12 — Typical Accessory Tray
• NEVER exchange ProjectPro™ nozzles without locking the
trigger lock on the trigger.
• DO NOT twist ProjectPro™ nozzles while spraying.
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
CAUTION
Figure 14 — Delicate Nozzle
Section 4: Operation
Delicate
40° Yellow
1650 PSI
2.2 GPM
General
15° Orange
1950 PSI
2.1 GPM
Max
0° Red
2200 PSI
1.9 GPM
Black
Use to apply
detergent
Figure 13 — Nozzle Spray Patterns
Low Pressure
High Pressure
www.mymowerparts.com
Briggs & Stratton Generac Generator Discount Parts Call 606-678-9623 or 606-561-4983
