background image

 WARNING 

Failure to read and follow the safety warnings and 

instructions in this document and in the tractor operator’s 

manual could result in death, serious injury, and/or 

property damage.

The warnings and instructions must be read, understood, 

and followed when setting-up, operating, servicing, 

transporting, or storing the unit.

 DANGER

  •  DO NOT operate the unit without either the entire 

grass catcher or the deflector in place.

  •  Turn off the PTO to disengage the blades when not 

mowing.

  •  DO NOT mow in reverse unless absolutely necessary. 

Always look down and behind before and while 

traveling in reverse.

 DANGER 

Amputation or Laceration Hazard

  •  If the mower stalls or the collection system plugs, 

disengage the electric clutch (PTO), stop the engine 

and remove the key. Set the parking brake. Wait for 

moving parts to stop. Remove the foreign object or 

clear the chute with a piece of wood before restarting 

the engine. Never place hands into the blower housing 

to clear a jammed object.

  •  Disengage the electric clutch (PTO). Shut off the 

engine, remove the key, and wait for all moving parts to 

stop before attaching, adjusting, or disconnecting any 

part of the collection system.

  •  DO NOT make adjustments or repairs while the 

engine is running or blades are moving.

  •  DO NOT not place hands or feet near rotating parts.

 WARNING 

Thrown Objects Hazard

Do not open the cover while the blades are turning.

  •  Check the collection system to make sure it is bolted 

tightly to the unit.

  •  Collector bags are subject to deterioration and wear    

during normal use.  Inspect the bag periodically for 

tears, holes, or weak spots and replace with a new 

bag that meets manufacturer’s durability standards.

 WARNING  

Loss of Control, Roll-over and Tipping 

Hazard

  •  Use a reduced speed on uneven ground and when   

turning corners.

  •  Reduce loads on hillsides. It is recommended that 

the collection system be kept only half full when 

mowing any slope. Start mowing on slopes when the 

collection system is empty.

  •  Mow up and down the face of slopes; never across 

the face of any slope.

  •  Never operate on slopes greater than 17.6% (10°).

  •  Select a slow ground speed before driving onto a 

slope. Avoid using brakes to control speed.

  •  Use caution when changing directions and DO NOT 

start or stop the tractor while on a slope.

Safety Decals 

Before operating the grass catcher, read and understand 

the installed safety decals. The decals are provided to help 

you avoid personal injury or damage to the product.

If any safety decals become damaged or illegible, order 

replacements from your local authorized dealer.

Decal - WARNING 
Thrown Objects Hazard

Part Number - 1732819

Part Number - 7104709

Thrown objects hazard

• Objects thrown by the mower can seriously 

   injure or kill you.
• Do not open the hopper while the mower blades 

   are turning.
• Do not operate the mower without the complete 

   catcher in place. 

WARNING

1732819

7104709

3

Not for Reproduction

Содержание 1696462-00













Отзывы: