Briggs & Stratton 040298, Руководство по обслуживанию и устранению неисправностей

Страница: 60 / 68

56
3
3
Remove the Exhaust Flex Tube
1. Remove the two bolts that hold the exhaust tube to
the engine ( A , Figure 4).
Figure 4
2. Slip the flexible exhaust manifold up and out of the
muffler assembly ( B , Figure 5).
Figure 5
3. Remove the two bolts that secure the muffler heat
shield assembly and set the heat shield aside.
Disconnect Control Panel Wiring
1. Remove the four mounting screws ( A , Figure 6) that
secure the face of the control panel, then carefully tilt
down the panel to expose the control panel board.
Figure 6
2. Disconnect the line-side wiring (Figure 7) from the
circuit breaker.
Figure 7
3. Using pliers, squeeze the barbs together to remove
the plastic wire retainer ( B , Figure 8).
4. Remove wire nut ( C ) from wire connection.
Disconnect wire harness, then gather wires and push
them through the grommet (
D ).
Figure 8
Not
for
Reproduction