Briggs & Stratton 040248A, Руководство оператора

Страница: 14 / 96

14 BRIGGSandSTRATTON.COM
Generator Controls and Features
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments.
Save this manual for future reference.
A ‑ Engine Model Number Identification — (stamped on
top of valve cover) Identifies engine model and type.
B ‑ Rotating Screen — Prevents large debris from entering
engine cooling airflow stream.
C ‑ Oil Fill Cap/Dipstick — Check and fill engine with
recommended oil here.
D ‑ Control Panel — Used for various operation and
maintenance functions. See Control Panel Controls and
Features .
E ‑ Oil Drain Hose — Provided to facilitate oil changing.
F ‑ Unit Data Decal — Displays model, revision and serial
numbers.
G ‑ Battery — (installer-supplied) 12 Volt DC, sealed
battery provides power to start the engine.
H ‑ Equipment Grounding Terminal — Connect generator
to earth ground here.
J ‑ Lifting Pockets — Provided at each lower corner for
lifting generator and attached pad.
K ‑ Fuel Inlet — Fuel supply components are attached to
generator here.
L ‑ Exhaust Port — High-performance muffler lowers
engine noise to comply with most residential codes.
Includes approved spark arrester.
M ‑ Oil Filter — Filters engine oil to prolong generator life.
N ‑ Hazard/Start/Stop Instructions — Observe these
warnings and procedures when operating generator.
P ‑ Air Cleaner — Uses a dry type filter element and foam
precleaner to protect engine by filtering dust and debris
out of intake air.
A
P
G
N
M
B
F
C
K
L
D
J
E
H
Generator is pictured with access doors removed for clarity.
Not
for
Reproduction