Replica 1 TE Users Manual
© Briel Computers 2007 page
22
Programming in BASIC:
To start the replica 1 and enter BASIC, turn on the replica and press reset. Next type in:
E000R
[RETURN]
The memory contents of E000 are displayed and BASIC begins. The prompt for BASIC is ‘
>
’. This is how you
know you are in BASIC. Here is a simple ‘HELLO’ program you can type in:
10 PRINT “HELLO WORLD!”
20 END
RUN
When you type in
RUN,
the program will print out “HELLO WORLD!” onto the display, and then it will return
to the prompt. You can view your program by typing in “LIST”. To get started programming in BASIC, read
the BASIC manual. There are many example programs on the internet to help you get started.
Krusader:
The replica 1 has 8K of EEPROM (ROM) space onboard. 4K is used for BASIC; 256 bytes are used for the
Woz monitor. This leaves just under 4K available. Now, thanks to Ken Wessen, that space is now occupied with
a powerful assembler called Krusader. To start Krusader, type in ‘
F000R
’ [return]. To program the assembler,
refer to the Krusader manual for sample programs and commands.