VP-4 User Manual
17
Figure 1-1
Wiring over LAN
Set the IP address of the device for accessing via LAN.
Steps:
1.
To get the IP address, you can choose either of the following method:
Use Advidia Device Utility, a software tool which can automatically detect
Advidia devices in the LAN and list the device information like IP address,
subnet mask, port number, device serial number, device version, etc., shown
in Figure 1-2.
2.
Change the IP address and subnet mask to the same subnet as of your PC.
Refer to the following introduction to set IP address with SADP software:
Search active devices online
Search online devices automatically:
After launch the SADP software, it automatically searches the online devices every
15 seconds from the subnet where your computer locates. It displays the total number
and information of the searched devices in the Online Devices interface. Device
information including the device type, IP address, port number, gateway, etc. will be
displayed.
