VP-4 User Manual
16
getGateway
+ “Enter”.
setGateway
×
√
Set gateway.
Command format:
setGateway
Gateway, e.g., setGateway
192.168.1.1.
setEnaAlarmSms
×
√
Enable SMS alarm.
setWhiteList
×
√
Set whitelist.
getWhiteList
√
√
Get whitelist.
delWhiteList
×
√
Delete whitelist.
setOffLineTime
×
√
Set offline time.
setCmsAddr
×
√
Set IP address of push mode.
setUserName
×
√
Set user name of push mode.
setPuPsw
×
√
Set password of push mode.
setNetType
×
√
Set network type.
showPuParam
√
√
Get push mode parameters.
setSdkPrint
×
√
Set push mode print.
If you want to switch to
guest
from
admin
, you may type the “su guest” command. When symbol “$” appears, it
indicates the current user account has switched to
guest
.
Figure 3.8 Switch to
guest
3.3 Advidia Device Utility
Purpose:
To view and configure the device via LAN (Local Area Network), you need to connect the
network device in the same subnet with your PC. Then install the Advidia Device Utility to find
your Advidia Camera or Encoder
The following figure shows the cable connection of a network camera and a PC:
