Bridgeview Manufacturing Inc
.
FlexCart 48 Header Transport
10
Service & Maintenance
With proper service and maintenance, your FlexCart trailer will provide years of trouble-free
operation. As is typical with other seasonal pieces of equipment, setting up for long term storage in
the off season is critical for longevity. There are a few key areas that require special attention:
Axles:
-
The FlexCart features Dexter EZ-Lube axles. Lubricate as follows:
o
Remove the rubber plug inside the hub cap
o
Install a grease gun to the zerk inside. Apply grease until new grease begins to flow
back through the bearings.
o
Rotate the hub slowly while applying grease
o
Wipe away excess grease, and reinstall the rubber cap
-
Check all mounting bolts.
-
Inspect the hub bearings. There should be minimal play in the hub. It should spin smoothly,
with some resistance, but still easily by hand. Check for grease coming out of the inner seal.
-
Full removal and inspection should be done at 12000 miles.
-
Consult the Dexter service manual:
Brakes:
-
Check the breakaway battery kit. Push the button on the side of the gooseneck. If necessary,
charge the battery (12 volt DC). This can be done by plugging the trailer into a vehicle for up
to 20 minutes.
-
If sitting long term, the battery can be removed and stored in a warm dry location. This will
help to prevent premature damage to the battery. Periodic charging may be necessary.
-
Check that each brake is operational. This should be done before every trip.
-
Readjust the brakes after 200 miles.
-
Fully disassemble and inspect the brakes after 12000 miles.
-
Consult the Dexter service manual:
https://www.dexteraxle.com/user_area/content_media/raw/600-8k_complete_service_manual.pdf
https://www.dexteraxle.com/user_area/content_media/raw/600-8k_complete_service_manual.pdf
