Bridgeview BALE KING 5300 Series Скачать руководство пользователя

Страница: 38 / 105

Bridgeview Manufacturing Inc.

Transportation

The Bale King 5300 can be safely towed on public roads, provided the following precautions are

met:

•

Tow vehicle and hitch must be rated at least 5300 lb gross, and 1600 lb tongue.

•

NEVER exceed 40 km/h (25 mph).

•

ALWAYS ensure that the safety chain is properly installed

•

Tow vehicle must have a 7-pin round trailer plug (or adaptor)

•

Plug in lights and check for proper function (flashing amber lights, red tail lights and

brake lights)

•

Ensure that the supplied SMV (Slow Moving Vehicle) sign is clearly visible from the rear

•

Lift the forks all the way up and install the safety locks

•

If applicable, the 3 Bale Kit should be closed as much as possible without hitting the fork.

•

If possible, the deflector should be in the folded position

•

Ensure that the deflector safety lock is installed

•

Ensure that the PTO and hydraulic hoses are properly secured

NOTE: With the deflector folded and no grain tank, the overall width of the processor is 8'-6".

Check with local authorities regarding transport on public roads. Follow all applicable laws

and regulations.

Содержание BALE KING 5300 Series










































































































Результаты поиска

Содержание BALE KING 5300 Series

Отзывы:

Похожие инструкции для BALE KING 5300 Series

Бренды по названию

Популярные бренды

Bridgeview BALE KING 5300 Series, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание BALE KING 5300 Series

Отзывы:

Похожие инструкции для BALE KING 5300 Series

Бренды по названию

Популярные бренды