Bridge ESOL Static Fogger, Руководство пользователя

Страница: 8 / 9

Problem Solving
PROBLEM REASON
SOLUTION
Light off, fan not working,
no mist.
Power not connected or
issue with power source.
Try another power socket.
Light on, fan not working,
no mist.
Too much water is in the
base.
Pour out water from the
base and restart.
Only a small amount
of mist.
Transducer cover by furring.
Clean the furring away
and change water.
Water can not reach
base.
Valve stuck or water tank
positioned incorrectly on base.
Clean valve and reposition the
water tank onto base.
Water higher than
the mark.
Pour out some water till its
lower than the mark.
General advice
Always use a hygrometer to check the humidity levels are correct.
In cold weather, windows and walls may sometimes fog or develop excess
condensation from too much humidity. If this occurs, reduce the mist intensity
setting.
Allowing
too much moisture to accumulate, could allow bacteria and fungi to
g row, and can also damage furniture, walls and wallpaper.
To prolong the life of this humidifier, using distilled water is highly recommended. Do
not add fragrance or oil in the water, it will cause the machine to malfunction and void
the warranty.
Conformity with directives
This product is CE marked to denote conformity with Directives 2014/35/EU
(low Voltage) and 2014/30/EU (Electromagnetic Compatibility), as amended.
Environmental protection
Disposal
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources.