Page 5
BrickHouse Security User’s Guide
Page 6
BrickHouse Security User’s Guide
Getting Started
Charging the Hat Camera
The Camera module is located inside the hat. Pull up the
cloth flap that is Velcroed inside the hat. Insert the supplied
USB Cable into the USB port located on the right side of the
Camera module. Then connect the other end of the cable to a
USB port on a computer to begin charging. Once the camera
module is fully charged, a blue indicator light will come on. It is
recommended to continue charging 30 minutes after the blue
indicator light comes on to obtain a maximum charge.
Inserting and Removing the Micro SD Card
The micro SD card slot is located on the left side of the
camera module. Push the card all the way in until you hear a
click. To remove the micro SD card, push the card further into
the micro SD card slot until you hear a click. The slot will then
release the micro SD card.
Powering On
To power on the camera module, push and hold the C button
for 3 seconds. There will be a long vibration indicating that the
camera module has been turned on. (The indicator lights will
come on and go to a steady Red meaning the camera module
is in STANDBY MODE.)
