39
True Day & Night
Auto
- The Network Camera automatically removes the filter by judging the level of
ambient light.
Manual -
In day mode,
enable the IR CUT
to keep the IR cut filter active at all times
so the infrared light does not reach the sensor and distort the color.
In night mode,
disable the IR CUT
to deactivate the IR cut filter at all times so the sensor accepts
infrared light and improves low light sensitivity.
Light Sensor
The light sensor uses light sensitivity to signal the camera when to activate the IR LED
and switch to night mode. When the light exposure falls below the threshold, the camera
will automatically switch from day to night mode. Select the threshold value from 0-255;
higher threshold values raise illumination sensitivity.
Color Effect
-
Select to display color or black and white video streams.
Click
Apply
to apply settings or
Cancel
to cancel changes.
