Brickcom Fixed Box FB-100A Скачать руководство пользователя страница 15

Страница: 15 / 88

Hardware Reset

The Reset Button can be used to reboot the camera or restore it to factory default settings.

If the camera experiences a problem, rebooting the camera may correct the problem. If

the problem remains, please restore the camera to factory default settings and reinstall

the software.

To Reboot - Press and hold the Reset Button for one second using a paper clip or thin

object. Wait for the camera to reboot.

To Restore

– Press and hold the Reset Button for ten seconds until the LED light turns off.

When successful restored, the LED will be blue during normal operation.

Note -

By restoring the camera, all settings will be restored to the factory default

settings.

SD Card Capacity

(*)

The network camera is compatible with SD/SDHC (Maximum 32GB) cards.

(*) These are optional features. Please refer to the Product List for the full list of

optional features that are available for this product

Reset Button

Содержание Fixed Box FB-100A

























































































Результаты поиска

Содержание Fixed Box FB-100A

Отзывы:

Бренды по названию

Популярные бренды

Brickcom Fixed Box FB-100A, Руководство пользователя

Результаты поиска

Содержание Fixed Box FB-100A

Отзывы:

Бренды по названию

Популярные бренды