2
Step 2:
Wait for the camera to finish its startup process. For models ADC-V520, ADC-
V520IR, and ADC-V720 the LED will change slowly change from no light, to a solid red,
to blinking and then to solid green. For model ADC-V620PT wait until the device stops
rotating.
Step 3:
Press and hold the camera’s WPS button for 5 seconds and release. The blue
LED should start flashing. If the blue LED is solid Blue, hold down the WPS button for a
few seconds to clear the light and try again. If the blue LED is not on at all, try pressing
the WPS button again.
Step 4:
Press the corresponding WPS button on the router. You may have to hold this
button for a few seconds. Often, a light will flash on the router to show that it’s working.
