9
Smart Pour™ Electric Switch Kettle
Kettle Operation
Before plugging the kettle into the wall outlet, check that the electrical circuit is not
overloaded with other appliances.
•
Set the base (8) on a flat, even and steady surface.
•
Remove the kettle from the base (8). Take off the lid (3).
•
Fill the kettle with water (ill. A) under the “Max 1.2” marking. Do not fill over
the “Max” marking. See the water level (6) for adding the desired amount
of water.
•
Connect the power plug (9) to a wall outlet (ill. C).
◦ If your kettle includes a removable power cord, insert the female end of
that cord into the base first.
•
Press down the On/Off switch (7) to the “On” position to start boiling the
water (ill. D). The indicator light illuminates.
•
After boiling is finished, the kettle turns off automatically.
•
Let the appliance cool down 1 minute before boiling water again.
•
Pour the hot water into a heat resistant container (ill. E).
•
Manually interrupt the boiling process by lifting up the “On/Off” switch (7)
to off position.
•
After each use remove the power plug (9) from the wall outlet (ill. C).
WARNING: The appliance is very hot during use. Do not touch (ill. G).
Danger of burns!
WARNING: Never leave the kettle unattended while boiling water. Especially
when there are children nearby.
WARNING: Do not open the lid (3) while boiling water.
Adjusting Kettle Lid Tension
If you feel the kettle lid is too hard or too easy to remove
from the kettle, please follow the steps below to adjust
the tension:
10) Take the lid (3) off of the kettle.
11)
Use a pair of needle-nosed pliers or similar tool to
adjust the three tabs of the kettle lid. If you push in
the tab, the lid tension will be reduced and easier to put on and take off. If you
pull out the tabs the lid will be harder to pull off.
12)
After adjusting the tabs, replace the lid and remove it again to see if your adjustment
is correct.
13)
Repeat steps 2 and 3 until you have adjusted the lid to your preference.
Lid Tab
