10
Variable Temperature Kettle
7) Program for Automatic Use (Auto Brew Function)
•
Note:
The Auto Brew time is the time at which the automatic heating cycle will be
complete.
•
To program your Auto Brew function:
◦
Press and hold the Auto Brew icon (16) for 3 seconds. The target temperature
will flash on the right side of the LCD Readout (10).
◦
Press the [ + ] icon (19), [ – ] icon (18) to select or set the desired Auto Brew
temperature.
◦
Set the Auto Brew time:
-
Press the Auto Brew icon (16) again. The Auto Brew time will display on
the right side of the LCD Readout (10), with the hour digit(s) flashing.
-
Press the [ + ] or [ – ] icons [(19) or (18)] to change the hour portion of
the Auto Brew time.
-
Press the Auto Brew icon (16) again and the minutes portion of the
Auto Brew time will flash.
-
Press the [ + ] or [ – ] icons [(19) or (18)] to change the minutes portion
of the Auto Brew time.
◦
Set the Current Time:
-
After setting the Auto Brew Time (see above), press the Auto Brew icon
(15), the hour of the current time will flash on the left side of the LCD
readout.
-
Press the [ + ] or [ – ] icons [(19) or (18)] to change the hour portion of
the current time.
-
Press the Auto Brew icon (16) again and the minutes portion of the
current time will flash.
-
Press the [ + ] or [ – ] icons [(19) or (18)] to change the minutes portion
of the current time.
◦
Once the Auto Brew Time and current time are correct, wait for 3 seconds for
these times to be stored.
◦
To activate the Auto Brew function, press the Auto Brew icon (16) one time.
The Auto Brew icon will light up and the Auto Brew symbol will appear on the
lower right of the LCD Readout (10).
•
8 minutes prior to when the programmed Auto Brew time, your kettle will turn on.
•
Once the Target Temperature has been reached, 3 audible beeps are heard. The
kettle will then enter the Keep Warm function for the next 60 minutes, unless any
icon is pressed or the kettle is lifted from the base.
•
To cancel the Auto Brew function,
◦
Press the Power icon (12) at any time
◦
Press the Auto Brew icon (16) before the heating cycle has begun.
Notes:
•
The Auto Brew icon (16) must be pressed to activate the function after being set.
The Auto Brew icon is illuminated and the LCD Readout (10) displays the Auto Brew
icon in the lower left.
•
Press the Auto Brew icon (16) again before the program starts to cancel the
Auto-start function.
•
When the programmed Auto Brew time is reached, the heating process will
be complete.
•
If the Auto Brew time and current time are less than eight (8) minutes apart, the
