Brewer's Ledge Treadwall AM, Руководство по обслуживанию

Страница: 12 / 32

Treadwall
®
Service Bulletin #2: FRAME ADJUSTMENT WITH
"X-BRACING"
Adjustment of the Treadwall frame by means of the "X-Bracing" in the back allows the wall to
be centered between the main side frames. It is important both for angle adjustment as well as
the wall's performance that the wall be centered.
With the wall at vertical, note the gaps between the side channels and the two main side
frames. When the wall is centered, the gap on the right side (just below the angle-adjuster
wheel) should be 3"
If the wall needs adjustment, loosen both turnbuckles at the bottom of the "X-Braces" in the
back; re-tighten on the side to which you wish swing the wall. For example, if the wall is too
close to the right side, you will need to tighten the right "X-bracing" to bring the wall closer to the
right side.
You may find as you tighten one side, you will have to continue to loosen the opposite
turnbuckle to give yourself enough slack.
"X-bracing"
a n d
Turnbuckles
"X-bracing"
and
Turnbuckles
note that channels
should be parallel
to the frames
VIEW FROM BACK
OF TREADWALL
3 "