background image

8

• Any maintenance other 

than cleaning should 

be performed at an 

authorised Breville 

Service Centre.

• It is recommended to 

regularly inspect the 

appliance. To avoid a 

hazard, do not use the 

appliance if power cord, 

power plug or appliance 

becomes damaged in 

any way. Return the 

entire appliance to 

the nearest authorised 

Breville Service Centre 

for examination and/or 

repair.

• The installation of 

a residual current 

device (safety switch) 

is recommended to 

provide additional safety 

protection when using 

electrical appliances. 

It is advisable that a 

safety switch with a rated 

residual operating current 

not exceeding 30mA be 

installed in the electrical 

circuit supplying the 

appliance. See a qualified 

electrician for professional 

advice.

• During electrical storms, 

the appliance should be 

disconnected from the 

power source at the wall 

socket to prevent any 

electrical surges that may 

arise during the storm and 

which may inadvertently 

cause damage to the 

appliance and its 

electronic componentry.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

LEM750_ANZ_IB_A20.indd   8

5/8/20   12:37 pm

Содержание the Bakery Chef Hub LEM750





























Отзывы: