![background image](http://html.mh-extra.com/html/breville/tempset-lke842/tempset-lke842_instruction-book_2809346009.webp)
9
6. If the KEEP WARM function has been
activated, the KEEP WARM button
surround and the START/CANCEL button
surround will remain illuminated in red, the
selected temperature button surround will
remain illuminated in white with 3 beeps,
indicating the kettle will maintain the
desired temperature setting for 20 minutes.
After 20 minutes, the kettle will switch
off and 5 beeps will sound , indicating the
KEEP WARM has finished.
7. If further heating and KEEP WARM of the
kettle is not required, switch off at the power
outlet, unplug the power cord and empty
the water from the kettle. Replace the kettle
onto the power base.
8. The kettle should be stored on its power
base when not in use. The power outlet
should be switched off and the power
cord unplugged from the power outlet
when not in use.
WARNING
Do not operate the kettle on an inclined
surface. Do not move the kettle while it is
switched on.
WARNING
The heating element surface is subjected to
residual heat after use.
WARNING
The appliance is designed for boiling of
drinking quality water only. Never use to heat
or boil any other liquids or foodstuffs. The lid
should always be firmly in place and locked
into the closed position before use.
WARNING
Do not press the lid release button to open the
lid during and immediately after operation.
This may result in boiling water splashing from
the kettle. Pour out all the hot water from the
kettle before opening the lid to refill.
NOTE
The default temperature setting of the kettle
when switched on at the power outlet is 100°.
−
When the kettle is switched off at
the power outlet and switched back
on, it will automatically default to
the 100° temperature setting.
−
When the kettle remains switched
on at the power outlet and different
temperature settings have been
selected, the kettle will default to the
last selected temperature setting.
NOTE
This kettle must be used only with the power
base supplied. Use caution when pouring water
from your kettle, as boiling / heated water
and steam will scald. Do not pour the water
too quickly.
NOTE
Always fill the kettle to between the minimum
(500ml) and maximum (1700ml) marks on
the water window on the kettle. Filling above
the maximum mark on the water window of
the kettle may result in boiling/heated water
splashing from the kettle.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device, which
protects against overheating should the kettle
be operated with insufficient water. If this
occurs the kettle will stop heating and all the
lights around each of the buttons on the power
base will continuously flash for about one
minute. Switch off at the power outlet and allow
the kettle to cool before refilling. The safety
device will automatically reset when the kettle
has cooled down.
Содержание TempSet LKE842
Страница 1: ...the TempSet Kettle Instruction Book Suits all LKE842 Models ...
Страница 11: ...11 Notes ...