Breville TempSet LKE842, Инструкция

Страница: 10 / 12

10
Always switch off at the power outlet and
unplug the appliance from the power outlet
before cleaning.
REMOVABLE FILTER
The Breville TempSet™ Kettle features a
removable mesh filter to remove scale deposits
for cleaner water. To clean the scale deposits
from the filter, remove the filter by opening the
lid and sliding the filter up and out of the kettle.
The filter can be cleaned by placing under
running hot water and rubbing with a cleaning
cloth or brush. To replace the filter, simply slide
the filter down into the slot behind the spout of
the kettle and push back into position.
NOTE
The filter could become damaged with time, so
check regularly and replace if found damaged.
WARNING
Never immerse the kettle base, power base,
power cord or power plug in water, or allow
moisture to come into contact with these parts.
WARNING
To prevent damage to the kettle do not use
chemicals, alkaline cleaning agents, steel wool
or abrasive cleaners to clean the inside or
outside of the kettle. Use a mild cleaning agent
with a soft damp cloth.
MINERAL DEPOSITS AND
DISCOLOURATION
Due to the large surface area of the immersed
element (interior base), discolouration due to
mineral deposits from tap water may appear
more obvious by leaving a brown stain on the
base. THIS IS NOT RUST. Discolouration may
be removed by purchasing the Breville Kettle
Cleaner and following the instructions on
the packaging.
ALTERNATIVELY:
1. Fill the kettle until 2⁄3 full with 1 part
vinegar (or a few slices of lemon) and 2
parts water, bring to the boil and allow to
stand overnight.
2. Empty the solution from the kettle. Fill the
kettle with clean water, bring to boil and
discard the water. Repeat and the kettle will
be ready for use.
TO CLEAN THE EXTERIOR
The exterior of the kettle and power base
should be wiped with a damp cloth then
polished with a soft, dry cloth.
NOTE
Do not use chemicals, steel wool, or abrasive
cleaners to clean the inside or outside of the
kettle or power base.
STORAGE
Ensure the kettle is switched off, clean and dry
before storing. Ensure that the lid is closed and
locked securely into place. Wrap the power
cord around the power cord storage under the
power base. Stand the kettle upright on the
power base. Do not store anything on top.
Care, Cleaning & Storage