Breville Prima Latte III, Быстрый старт

Страница: 7 / 18

13
12
MORE FOAM LESS FOAM
a.
x1 x1
b.
x2 x2
PREPARING LATTE
Prior to preparing your latte, adjust the level
of frothed milk according to your preference
by turning the Froth Control Knob to the right
for more foam (cappuccino) and to the left for
less foam (latte).
a. Press the Latte Button “ ” to brew
a small cup of latte. The indicator
symbol (1) will illuminate for a small
cup of latte. The progress bar will
indicate a small cup of latte is brewing.
b. Press the Latte Button “ ” to brew
a large cup of latte. The indicator
symbol (2) will illuminate for a large
cup of latte. The progress bar will
indicate a large cup of latte is brewing.
The unit will start brewing latte according
to your selection. The unit will stop
automatically after the brewing process
and the progress bar will become a solid
illuminated light, indicating that the cycle
has completed.
PREPARING FROTHED MILK
The Breville One-Touch Coffeehouse II
also allows you to prepare frothed milk
alone. Press the Manual Foam “Froth”
Button “ ” if you wish to add more foam
to your beverage or to prepare frothed milk
for any other beverage, e.g. macchiato, hot
chocolate, chai latte, etc. Press the Manual
MORE FOAM LESS FOAM
a.
x1 x1
b.
x2 x2
AFTER PREPARING YOUR
BEVERAGES WITH MILK
Once you are done preparing your
beverage with milk, you can either store
the unit’s milk reservoir directly in the
refrigerator (ready to be used for the next
time) or dispose of the leftover milk.
Place a large empty cup (with at least 325
mL/ 11 fl. oz. capacity) under the frothed
milk dispensing tube. Turn the Froth
Control Knob counter clockwise to the
clean position “ ” then press the Clean
button “ ” to activate the clean function.
Let the unit dispense the water through
the tube until it comes out clear. The unit
will automatically stop when the progress
bar stops cycling and fully illuminates in a
solid light, the clean cycle is completed,
or you can press the clean button “ ” to
stop the process.
x1 x1
x1 x1
PREPARING CAPPUCCINO
Prior to preparing your cappuccino,
adjust the level of frothed milk according
to your preference by turning the Froth
Control Knob to the right for more foam
(cappuccino) and to the left for less foam
(latte).
NOTE: The level of foam can also be
adjusted during the brewing cycle.
a. Press the Cappuccino Button
“ ” once to brew a small cup of
cappuccino. The indicator symbol
(1) will illuminate for a small cup of
cappuccino. The progress bar will
indicate a small cup of cappuccino is
brewing.
b. Press the Cappuccino Button
“ ” twice to brew a large cup of
cappuccino. The indicator symbol
(2) will illuminate for a large cup of
cappuccino. The progress bar will
indicate a large cup of cappuccino is
brewing.
The unit will start brewing cappuccino
according to your selection. The unit
will stop automatically after the brewing
process and the progress bar will become
a solid illuminated light, indicating that
the cycle has completed. Your delicious
cappuccino is now ready to be enjoyed!
Foam “Froth” Button “ ” once again to
stop the machine.
CLEANING LIGHT WILL REMAIN
ILLUMINATED WHEN YOUR MACHINE
IS READY FOR A CLEANING CYCLE.
Always switch off, unplug and allow to cool
before removing parts and cleaning
CLEANING THE MILK RESERVOIR AND
FROTHING TUBE
Although you can store the milk reservoir with
leftover milk in the refrigerator, it is important
to clean the reservoir and frothing tube
regularly to avoid clogging and residue build-
up. In order to clean the milk reservoir, please
follow the instructions listed below:
1. Remove the milk reservoir from the unit
by lifting up the milk reservoir release
button and simultaneously sliding the
milk reservoir out.
2. Remove the lid of the reservoir.
3. Dispose of any milk left, then rinse
and wash the milk reservoir and its
lid thoroughly with warm soapy water.
Make sure to rinse and dry them well.
Do not use abrasive cleaners and
scouring pads, as they will scratch the
finish.
NOTE: The milk reservoir is also
dishwasher safe (top rack). Do not
place the lid of the milk reservoir in the
dishwasher.
4. Fill milk reservoir with water, not above
the MAX fill line. Place milk reservoir
back onto unit, lifting up on reservoir
release button and simultaneously
sliding milk reservoir in, holding
reservoir by the lid.
5. Place a large empty cup under the froth
dispensing tube.
6. Turn the Froth Control Knob counter
clockwise to the clean position
“ ” then press the Clean “ ” button to
activate the clean function. The unit will
start releasing steam through the froth
dispensing tube. Let the cleaning cycle
run until you no longer see any water
coming out of the tube, or let the cycle
run until it stops automatically.