background image

15

4.  Place the replacement filter on to the base, 

ensuring that it is correctly centred and all 

packaging has been removed.

5.  Replace the body of the purifier back onto 

the base.

6.  Slide the toggle located on the base to the left 

until it locks into place. The purifier is now 

ready to use.

7.  Press and hold the    POWER button for 

5 seconds to reset the Filter Reset timer light.

NOTE

There is no top or bottom on the filter. The filter 

can be placed into the unit either way.

NOTE

If the filter is not in place or not fitted correctly, 

the air purifier will not operate. Ensure the base 

cover is locked before use.

WARNING

Unintended use of the air purifier or damage 

to the housing may result in the escape of 

dangerous UV-C radiation which is dangerous 

to the eyes and skin. Never operate the UV-C 

light outside of the air purifier.

REPLACEMENT OF THE UV-C  
LIGHT BULB 

The UV-C light on the control panel will flash 

continuously if the UV-C light bulb is not 

working properly. To replace the UV-C light 

bulb, follow the steps below:
1.  Remove the body from the base of the purifier 

and carefully turn the body over for access.

2.  Using a screwdriver, turn the screw anti-

clockwise until the UV-C cage loosens  

(about halfway). 

3.  Turn the UV-C cage anti-clockwise to unlock 

and remove from the body.

4.  Gently unscrew the UV-C light bulb to remove 

and replace with the new UV-C light bulb.

5.  Place the UV-C cage over the light bulb and 

turn clockwise, ensuring the screw is aligned 

with the slot.

6.  Tighten the screw to lock the UV-C cage in 

place.

REPLACEMENT FILTERS 

Replacement filters can be purchased from the 

Breville website^ or at participating retail outlets.
See the table below for the replacement product 

code to suit this Breville Air

 

Purifier.

Breville Air

 

Purifier 

Model No.

Filter Replacement  

Product Code

the Smart Air™ Viral Protect 

Compact  

LAP208

LAP020 AntiViral 

HEPA-13 Filter

the Smart Air™ Viral Protect Plus

LAP408

LAP040 AntiViral 

HEPA-13 Filter

^Delivery charges may apply. 

Only use the original Breville filter specially 

intended for this appliance. Do not use any other 

filters.
Contact Breville Customer Service Centre to 

purchase replacement UV-C light and filters. 

Filters may also be purchased in participating 

retailer stores. Visit Brevilleair.com for more 

details on product performance and testing 

claims.

Содержание LAP208





















Отзывы: