Breville Hot Cup, Инструкция по эксплуатации

Страница: 6 / 16

6
Using Your Hot Cup
Before using your Hot Cup for the first time
• Remove your Hot Cup carefully from the box. Remove any packaging and
promotional material and position your Hot Cup on a dry, level, secure work
surface away from the edge.
• Follow the instructions below on using your Hot Cup and discard the first five
measures of boiling water (i.e. the first full tank of water). This will remove any
residues that may remain from the manufacturing process.
Using your Hot Cup
Always position your Hot Cup in such a way that the start button cannot
be accidentally operated, especially by children. As you use your Hot Cup,
a certain portion of the water boiled will be transferred back to the water
reservoir. This will mean the water reservoir may become hot. Always use care
when handling your Hot Cup.
1. Press the lid release button.
2. Fill the water reservoir from your cold tap. The water level should be between the
MIN and MAX markings.
3. Close the lid and press the stop button. This will make sure that your hot cup will
not immediately start a boil cycle when you place it onto the power base.
4. Connect your Hot Cup to a mains supply socket.
5. Place a suitable cup or container with a tea bag, coffee, sugar, etc. below the
dispensing nozzle. Never operate your Hot Cup without a cup or suitable container
placed below the dispensing nozzle. Adjust the dispensing control to the required
setting. The control adjusts the quantity of boiling water dispensed by your Hot
Cup. For smaller cups like teacups, set the control towards the setting; for larger
cups like coffee mugs, set the control towards the setting. If you are not sure
which setting to use, it’s best to use a lower setting until you gain experience using
your Hot Cup.
6. Press the start button. The water tank will light up and your Hot Cup will start to
boil.
7. The selected quantity of boiling water will be dispensed into the cup. Your Hot Cup
is now ready to use again. If, after just having boiled, the start button doesn’t stay in
the down position, simply wait a few seconds before trying it again.
Stopping your Hot Cup
If you have started the boil procedure and then decide you want to stop your Hot
Cup for any reason, simply press the stop button. You can also stop water that is being
dispensed by pressing the stop button. The boiled water will be safely transferred back
into the water reservoir.