Breville BIA500XL, Инструкция

Страница: 10 / 52

10
OPERATING yOUR BREvILLE PROdUCT
Lift the mixer motor head up until it tilts
back and locks into the open position.
4. Place the freezer bowl into the bowl
locking recess of the mixer base and
turn the bowl clockwise until the bowl
locks securely into place.
NOTE
To remove or insert the freezer bowl,
the mixer motor head must be raised
and locked into the open position.
ATTACHING THE SCRAPPER PAddLE
TO THE MIXER MOTOR HEAd
NOTE
The freezer bowl must assembled and
used immediately after removing it
from the freezer to prevent it
from thawing.
1. Ensure the mixer motor head is in the
raised/open position. Align the groove
in the top of the Scraper Paddle with the
locking pin on the spindle extending
down from the mixer motor head.
2. Push the Scraper Paddle upwards and
turn clockwise until it locks securely
onto the locking pin on the spindle.
3. Lower the mixer motor head by
depressing the TILT-RELEASE button
and gently pushing the mixer motor
head down until it locks into the
horizontal (closed) position.
ATTACHING THE SPLASH GUARd
TO THE fREEzER BOWL
1. Ensure the freezer bowl is securely
attached to the mixer (see page 9). Place
both pieces of the of the splash guard
onto the freezer bowl so that the groove
lip of the splash guard sits inside the
groove of the freezer bowl.
USING THE fREEzE & MIX™
1. Ensure the Speed Control Dial is in
the OFF position and insert the power
plug into a grounded wall outlet. The
illuminated LED speed indicator band
will flash and the Count Up/Down timer
will display “0:00.” The Freeze & Mix™ is
now ready to be used.
2. Follow directions in the recipe for the ice
cream or frozen dessert being prepared.
3. Turn the mixer on the slowest speed
setting, marked FOLDING/KNEADING
on the LED speed indicator band before
adding any ingredients to the bowl.
Once the Scraper Paddle has started
to rotate, add the mixture through the
pouring spout of the splash guard and
into the freezer bowl.
BIA500XL_IB_C12_FA.indd 10 17/04/12 11:16 AM