Breville Barista Express BES870BSS, Инструкция

Страница: 33 / 36

33
PROBLEM POSSIBLE CAUSES EASY SOLUTION
Machine is not working.
•
The safety thermal-cut
may have activated due
to the pump or grinder
overheating.
•
Turn the machine off and
allow to cool for about
30–60 minutes.
No ground coffee coming from
grinder.
•
No coffee beans in hopper.
•
Fill hopper.
•
Blocked grinder chute.
•
Clean and clear grinder
chamber and chute. Refer
to ‘Advanced Grinder
Cleaning’, page 24.
•
Water / moisture in grinder
chamber and chute.
•
Clean and clear grinder
chamber and chute. Refer
to ‘Advanced Grinder
Cleaning’, page 24.
Grinder does not start when micro
switch is pressed.
•
Bean Hopper safety interlock
is open FILTER SIZE LEDs are
both flashing (hopper is not
correctly in place).
•
Remove hopper, check for
debris and then replace
the hopper into the correct
location.
Too much/too little ground coffee is
being delivered to the filter basket.
•
Grind amount settings are
incorrect for particular grind
size.
•
Use the grind amount dial
to increase or decrease the
grind amount.
Too much/too little espresso is
being delivered to the cup.
•
Grind amount settings and
or grind size require changing.
•
Reset the machine to
defaults or re-program new
coffee dose settings.
Grinder is making a loud ‘ratchet’
noise.
•
Blockage or foreign object in
grinder.
•
Switch the grinder Off
immediately. Remove
hopper & clear blockage in
the chute. Remove Upper
Burr and clear Lower
Burr. Refer to ‘Cleaning of
Conical Burrs’ on page 24.