Bresser Meteo Temp, Инструкция по эксплуатации

Страница: 31 / 36

31 / 36
11 Receiving measurements
automatically
Once batteries are installed, the base station will display the
measurement readings. Readings from the remote sensor
will be displayed within 3 minutes after powering it on.
If the clock fails to receive the time signal, then go ahead
with the following steps:
1. Press SYNC button for approx. 2 seconds to re-initiate
reception of measurements again.
2. If the device is still not receiving the signal: Press and
hold the DOWN button for approx. 2 seconds to initiate
reception of measurements again.
12 Weather trend
The weather station will calculate a weather trend for the
next 12-24 hours on basis of the measured values.
1 2 3 4 5
1 Sunny 2 Partly cloudy
3 Cloudy 4 Rain
5 Snow