multimedia
LED-MP2
26
• In order to avoid damage to the device and its acces-
sories, do not turn on the LED-MP2 during the charging
process.
• Do not remove the batteries from the device during the
charging process.
STArTInG.ThE.LEd-MP2..
When the batteries are in place, press and hold down on the
ON/OFF button for approx. 3 seconds. When the device is
connected to an electrical power source, press quickly on
the device’s ON/OFF button. A blue LED light signals the
connection. Another 3 seconds later, the system will start
up. Press the button to turn on the lamp. The complete
system is ready for use. Without the projection lamp, the
device can also be used as a media player.
If the device will not turn on, it might be that the batteries
do not have a sufficient charge, or that the LED-MP2 is not
connected to an electrical power source.
SAFETY.InFOrMATIOn..
Please read this safety information carefully and attentively:
• You may not look into the lens or the light of the projector.
Serious eye damage may result.
• This product is meant for use inside closed rooms.
• Please keep the LED-MP2 away from electromagnetic radia-
tion.
• You may not open or alter the LED-MP2.
• Do not place any heavy objects on the LED-MP2.
• Keep dirt and dust clear of the LED-MP2.
• Keep the LED-MP2 away from moisture. Do not place any vas-
es or any other vessels containing liquids on the LED-MP2.
• Clean with LED-MP2 in as dry a manner as possible, for in-
stance with a light, dust-free cloth.
• Do not place the LED-MP2 in direct sunlight, and avoid se-
vere changes in temperature.
• Handle the LED-MP2 carefully and avoid bumping or shaking it.
• Do not open the batteries, as there is a risk of explosion.
Should you need a replacement battery, contact the manu-
facturer‘s service hotline or replace it with an equivalent
model!
• Please do not take out the batteries when the LED-MP2 is
being charged, or is connected via USB to another device.
• Avoid high volume levels. Damage to the ears and auditory
passages may result.
• Place the MicroSB card correctly into the device in order to
avoid damage to the slot and the electronic mechanisms.
• Keep your LED-MP2 in a place where it will not fall down!
• If the LED-MP2 is connected to a computer via USB for a
long time, very high temperatures may result. Avoid doing
this.
• Defragment the LED=MP2 regularly! Remember to back
up the existing data before formatting the drive!
