Bresser F004355, Инструкция по эксплуатации, Страница: 6 / 16

Important: Disconnect the device from the power supply if it
is not going to be used for a long period of time!
BRIGHTNESS ADJUSTMENT
1. Turn the dimmer knob (
➌
) clockwise to increase the
brightness.
2. Turn the dimmer knob (
➌
) counterclockwise to decrease
the brightness.
COLOR TEMPERATURE ADJUSTMENT
2. Briefly turn the color temperature adjuster (
➍
) to set the
desired light temperature. The CCT range is 3200K and
5600K.
ADJUSTING THE TILT ANGLE
1. Hold the ring light and slowly loosen the locking screw for
the tilt joint (
➎
).
2. Move the lamp head to the desired position and tighten the
locking screw (
➎
) again hand-tight.
MOUNTING ON A TRIPOD
(optional)
1. Loosen the fixing screw (
➏
) for the tripod connection so far
that the opening of the tripod connection is exposed.
2. Place the lamp with the opening of the tripod connection
(
➐
) on the spigot adapter * of a tripod * and tighten the
fixing screw firmly.
Note: The ring light can also be held with the handles (
➋
)
that can be attached with the four screws included.
In this way, the lighting position can be changed quickly
and easily.
ATTACHING ACCESSORIES
(optional)
The ring light has three so-called cold shoes (
⓫
) which can be
used to attach the camera adapter (
⓭
) with the Smartphone
holder (
⓬
), for example.
USING THE USB PORT
The USB port (
⓯
) on the backside can be used to charge the
Smartphone or Camera while it is attached to the ring light.
DISPOSAL
Dispose of the packaging materials properly, according
to their type, such as paper or cardboard. Contact your
local waste-disposal service or environmental authority
for information on the proper disposal.
Do not dispose of electronic devices in the household
garbage! As per the Directive 2012/19/EU of the European
Parliament on waste electrical and electronic equipment
and its adaptation into German law, used electronic
devices must be collected separately and recycled in an
environmentally friendly manner.
TECHNICAL DATA
Model STR-48B
Output Power 48W
Lumious Flux 4800LM
LED Quantity 432 pcs
Color Temperature (CCT) 3200K to 5600K
Color Rendering Index
(CRI)
≥
85
Dimmer 10 - 100%
Light Source 0.2W SMD LED
with high brightness
Power Input AC100-240V 50/60Hz
Lithium Battery Type* NP-F750/960*
(Sony or identical)
Size/Weight Outer diameter 487mm,
Inner diameter 435mm,
Weight 2,1kg
"SONY" and the Sony Logo are registered trademarks of Sony Group
Corporation.
*not included