Bresser F004355, Инструкция по эксплуатации, Страница: 5 / 16

➍
➌
➏
➎
➐
➊
➋
➒
➓
⓫
⓬
⓯
⓭
⓮
➑
⓰
⓱
⓲
B
⓰ a
⓲ b
⓱ a
⓲ a
⓲ a
⓰ b
DELIVERY CONTENT
LED Light (A), AC power adapter (B), mains power cable (C)
PARTS OVERVIEW
LED LIGHT WITH SMARTPHONE ADAPTER (A)
➊
LED Lightsource
➋
Handle (2x)
➌
Dimmer knob
When turned on, the brightness range is 10-100%
➍
Color temperature adjuster
➎
Tilt joint with locking screw
➏
Fixing screw (tripod connection)
➐
Tripod connection
➑
Vents
➒
Battery holders
➓
Power switch
⓫
3x Cold shoe
⓬
Smartphone holder
(for Smartphones with a width of approx. 55 – 85 mm)
⓭
Camara adapter
⓮
DC connection socket
⓯
USB port
MAINS ADAPTER WITH CABLES (B)
⓰
Mains power adapter with 2-pole connection socket (16a)
and function light (16b)
⓱
Voltage cable (permanently connected to mains power
adapter) with DC hollow plug (17a)
⓲
Power cable with 2-pole plug (18a) and Euro plug (18b)
ESTABLISHING THE POWER SUPPLY
1. Insert the DC hollow plug of the power cable (
⓱
) into the
power connection socket (
⓮
) on the ring light.
2. Insert the Euro plug (
⓲
b) of the power cable into the power
outlet.
INSTALLING A V-MOUNT BATTERY
FOR POWER SUPPLY
(OPTIONAL)
1. If you require more mobility or don´t have access to a
mains supply, the light can also be operated by separately
available rechargeable batteries (Sony type NP-F750/960)
2. Insert them into the battery holders (
➒
)
TURNING ON THE LED LIGHT
1. Establish the power supply for the device (insert battery or
connect power cable).
2. Move the power switch (
➓
) to the 'I' position to switch the
device on by battery.
3. Move the power switch (
➓
) to the 'II' position to switch the
device on by mains adapter.
4. Move the on / off switch (
➎
) to the '0' position to switch
off the device. The last settings made are retained until the
device is switched on again.
*not included
A A
C