Bresser BR-S36B, Инструкция по эксплуатации

Страница: 10 / 32

10 / 32
2. Turn colour vtemperature adjustment knob to set the desired colour temperature (3,200 to 5,600
K, stepless).
10 Changing the lighting angle
1. Carefully loosen the locking knobs on both sides of the U-mount.
2. Move the light to the desired angle.
3. Hand-tighten the locking knobs again.
DANGER! Allow the housing surface to cool down before touching it! Touching hot components
can cause serious burns.
WARNING! Hold the light when the locking knobs have been loosened to avoid damage to the
panel!
11 Connection with an lighting console (DMX-RJ11)
(optional)
One or more LED lights can be controlled centrally when connecting them with a RJ11 compatible
lighting console* through suitable connection cables*.
1. Insert the RJ11 modular plug of the connection cable* into the corresponding socket on the lighting
console* and into the socket of the LED light.
2. Press the control selection knob to enable control via DMX lighting console. The DMX function
lamp lights up.
NOTICE! In DMX control mode, the LED light can be controlled only through the console.
3. For the manual control or remote control*, press the control selection knob again. The 2.4G func-
tion light will light up.
*not included
12 Technical data
Model BR-S-36B
(bicolor)
BR-S-60B
(bicolor)
Power consumption 36W 60W
Number of LEDs 360 600
Luminous flux 3,600 LM 6,000 LM
Lamps LED, not replaceable LED, not replaceable
Colour temperature 3,200K to 5,600K 3,200K to 5,600K
Dimmer 10% to 100% 10% to 100%
Operating voltage DC 13 to 19V power adapter
or optional
via 2 x NP-F750/970 lithium
battery
DC 13 to 19V power adapter
or optional
via 2 x NP-F750 lithium battery
or Sony V-lock lithium battery
Operating conditions dry, 0° C to +40° C dry, 0° C to +40° C
Storage conditions dry and dust-free, 0° C to +40°
C
dry and dust-free, 0° C to +40°
C
Table 1: BR-S Pro Series
NOTICE! The LEDs used in this device have a very long lifespan and do not need to be changed.
The LEDs can not be changed due to technical reasons!