2. Display Zone
Power
Brightness
Colour Temperature
Press the
buttons to adjust the Colour Temperature Range:
2500-9000K.
Press the
buttons to adjust the brightness Range: 0-100%.
RGB colour hue
Power
Brightness
S
34
Press the
buttons to adjust the HUE RGB Range: 0-360°.
Press the
buttons to adjust the brightness Range: 0-100%.
Current Effect
Power
Brightness
Effect Mode
HSI Fast
Press the
buttons to shift effects (20 effects).
Press the
buttons to adjust the brightness Range: 0-100%.
3. Effect Modes
Number
Scenario
Number
Scenario
1
CopCar
11
Strobe
2
Ambulance
12
RGB Strobe
3
FireAlarm
13
Paparazzi
4
Lightning
14
Emergency
5
Fireworks
15
H/L Beam
6
TV
16
Red Flash
7
Candle
17
Green Flash
8
Party
18
Blue Flash
9
Fault Bulb
19
HSI Slow
10
Pulsing
20
HSI Fast
PRODUCT SPECIFICATION
Model
BR-6RGB
Beads
White 33PCS
Yellow 33PCS
RGB 22PCS
CRI
95+
Voltage
3.7V
Battery Capacity
2000mAh
Illuminance
700LUX/0.3m
Color Temperature
2500-9000K
Work Time
Strongest Brightness > 2h
Weakest Brightness > 15h
Power
6W
Charge Port
Type-C
Beam Angle
120°
Charging Time
2.5h
Note:
The data of the light is on the base of average.
Slight difference shall exist among different lights.
DISPOSAL
Dispose of the packaging materials by type. Contact your
local waste-disposal service or environmental authority for
information on the proper disposal.
Do not dispose of electronic devices in the household
garbage! According to the European Directive 2002/96/EU
on Waste Electrical and Electronic Equipment and its
transposition into national law, used electrical equipment must
be collected separately and recycled in an environmentally
sound manner.
Observe the current legal regulations when disposing of the de-
vice! Information on proper disposal can be obtained from munici-
pal waste disposal service providers or the Environmental Agency.
CLEANING
Before cleaning the device, disconnect it from the power supply
(remove plug or remove batteries)!
Only use a dry cloth to clean the exterior of the device. To avoid
damaging the electronics, do not use any cleaning fluid.
Protect the device from dust and moisture. Store it in the sup-
plied bag or transportation packaging. The batteries should be
removed from the unit if it has not been used for a long time.
EC DECLARATION OF CONFORMITY
A "Declaration of conformity" in accordance with the
applicable directives and corresponding standards has been
prepared by Bresser GmbH. This can be viewed at any time upon
request at
www.bresser.de/download/F004612/CE/F004612_CE.pdf
UKCA DECLARATION OF CONFORMITY
A "Declaration of conformity" in accordance with the
applicable directives and corresponding standards has been
prepared by Bresser GmbH. This can be viewed at any time
upon request at
www.bresser.de/download/F004612/UKCA/F004612_UKCA.pdf
WARRANTY
The regular warranty period is 2 years and begins on the day
of purchase. You can consult the full warranty terms as well as
information on extending the warranty period and details of our
services at www.bresser.de/warranty_terms.
www.bresser.de/warranty_terms
