![Bresser BR-6RGB MINI TUBE Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/bresser/br-6rgb-mini-tube/br-6rgb-mini-tube_instruction-manual_2807792004.webp)
GENERAL WARNINGS
DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of
reach of children and animals.
Never touch parts of the device during operation or before it has
cooled down completely (approx. 45 min. after switching off)!
RISK OF GLARE!
Make sure that people and animals do not look into the light.
The high luminosity can cause glare to the eyes and afterimag-
es. This impairment of vision can lead to accidents.
RISK OF MATERIAL DAMAGE!
Make sure that no one can trip over connection cables of the
device. The device could be knocked over.
The manufacturer accepts no liability for damage to property caused
by improper or insufficiently safe installation!
Only use the recommended power supply unit or the recommended
rechargeable batteries
4
for the power supply!
The manufacturer accepts no liability for voltage damage caused by
the use of an unsuitable power adapter!
To prevent decreasing the strength of the magnets, do not attach
this device or the magnets to any surface hotter than 80C
°.
DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power
source (power adapter). Only use the device as described in the
manual. Otherwise, you run the DANGER of an ELECTRIC SHOCK.
Never bend, squeeze or pull power cables, connecting cables,
extensions or connectors. Protect cables from sharp edges and heat.
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with
damaged electrical parts! Damaged parts must be replaced
immediately by an authorized service agent.
Operate the device only in a completely dry environment and do not
touch the device with wet or damp body parts.
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and
ensure that it is stored in a reasonably safe place.
• Keep children and animals away from the device! They could
knock the device over.
• Make sure that no one can trip over connection cables. The
device could be knocked over.
• Do not expose the device to high temperatures. Do not short-
circuit the device or dispose of in fire! Excessive heat and improper
handling can cause short circuits, fires and even explosions!
• Never cover the ventilation slots or cooling fins of the device
during operation or until it has cooled down completely!
• Only use the recommended power supply unit or batteries
4
!
IMPORTANT NOTE!
Do not disassemble the device! In the event of a defect, please
contact your dealer. They will contact the Service Center and can
arrange the return of this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the
appliance is not in use, in case of a longer interruption of opera-
tion and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power
supply at any time. The power outlet should always be near your
appliance and should be easily accessible, as the plug of the
power cord serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains
plug and never pull the cable!
Do not subject the device to excessive vibrations.
PARTS LIST & DELIVERY CONTENT
DELIVERY CONTENT
A
Mini light tube (1x),
B
Carrying bag (1x),
C
Mini tripod (1x),
D
USB cable (type A/C) (1x),
E
Wrist strap with ¼” thread (1x),
F
Metal mount plates (2x),
G
User Manual
H
s
34
120
100%
RGB
PARTS LIST
¼” screw hole
Magnet adsorption
Magnet
Display screen
Up Button
Down Button
Power Button
Mode Button
Type-C charge port
LED Pannel
CHARGING
To charge the device, please use the USB cable and plug it
into the Type-C charge port (3). Then plug the other end of
the cable wiith the USB-A plug into a 5V power adapter (not
included) to connect it with a power socket.
CCT
9000K
100%
POWER SUPPLY
Note:
This device is powered by the built-in rechargeable battery.
Before commissioning, make sure that it is fully loaded. Only use
the main cable supplied for charging!
Press Power/Function button to power on the device.
INSTRUCTIONS
1. Power off/Mode Switch
Long press to turn on the light
Short press to switch light mode
(CCT Mode, RGB Mode, HSI Mode, Effect Mode)
B
C
D
E
F
G
A