Bresser BF-PRO, Инструкция по эксплуатации

Страница: 31 / 100

31
Important:
Please make sure your household voltage matched with the voltage
supported by the adapter, or it will damage your clocks and adapter.
D) BATTERY INSTALLATION: REMOTE UNIT
1. Remove the screws on the battery compartment.
2. Select the channel
3. Install 4 batteries (UM-3 or “AA” size 1.5V) strictly according
to the polarities shown.
4. Replace the battery compartment door and secure its screws.
E) LOW BATTERY WARNING
When it is time to replace batteries, the respective low-battery
indicator [
] will show up on the indoor or outdoor temperature.
F) SOFT-TOUCHING KEY
Your Weather Station features the soft-touch key technology.
It is different from the traditional button. You can use the function
key by touching softly on the lens instead of pressing the key.
G) GETTING STARTED
Once batteries are in place for the remote unit, they will start
transmitting temperature readings at around 45 seconds intervals.
The main unit will also start searching for signals for about two minutes
once batteries are installed. Upon successful reception, the outdoors
temperatures will be displayed .The main unit will automatically
update its readings at about 45-second intervals.
If no signals are received, blanks “
” will be displayed. Hold [
▼
]
for 2 seconds to enforce another search for about 2 minutes.
This is useful in synchronizing the transmission and reception of
the remote and main units.
Repeat this step whenever you fi nd discrepancies between the
reading shown on the main unit and that on the remote unit.
GB/IE