Bresser 9652100, Инструкция по эксплуатации

Страница: 30 / 36

30 / 36
26 Measurement function
Notes:
• Right-click the mouse to open the menu and then click on the measurement functions menu.
• Always double-click on submenu items.
• Maximum 100 groups of data possible.
• Each group supports a maximum of 10 points.
• To reset the currently selected function: Right click to open the menu and then click QUIT. Now
you can use a new function.
Measurement (MEAS.)
Delete: Choose what to delete.
Save: Save to one of the 8 save points.
Back: Reset to be able to use a new function.
Calibration index (CAL INDEX)
Selection of one of the 8 workspaces
Calibration (CALIBRATION)
Select unit: 100 mm / 10 mm / 1 mm
POINT
Count: Measuring point assigned with coordinates
RGB: Measure current RGB value
YUV: Measure current YUV value
LINE:
Point (PP): Measure the distance between two points
Line (PL): Measuring the vertical distance from a point to a straight line
Segment (ML): Irregular line. Drive along the line bit by bit with a mouse click. Press the middle mouse
button to stop setting the points.
Shape
Rectangle (RECT): Measure the length of the rectangle
Polygon (POLYGON): Measure the area of the polygon
Round (CIRCLE)
Radius (RADIUS): Set a circle point and radius.
Diameter (DIAM): Set a circle point and radius with diameter calculation.
3POINT: Set 3 points and use them to calculate the radius and area of the circle.
ANGLE
Arc: Set 3 points to confirm a circle and use it to calculate the radius and area of the circle.
Angle: Measure the angle between two line segments.