30
NOTE:
- The accuracy of a general pressure-based weather forecast is about 70% to 75%.
-
The weather forecast is meant for the next 12 hours, it may not necessarily reflect the current situation.
-
The weather icon will flash on display when the rainstorm comes.
- The
SNOWY
weather forecast is not based on the atmospheric pressure, but based on the outdoor
temperature. When the outdoor temperature is below -3°C (26°F), the
SNOWY
weather indicator will be
displayed on the LCD.
TO SELECT THE PRESSURE DISPLAY MODE
Press
[ BARO ]
key fo select between ABS and REL mode:
-
ABS
the absolute atmospheric pressure of your location.
-
REL
the relative atmospheric pressure based on the sea.
TO SELECT THE MEASUREMENT UNIT FOR THE BAROMETER AND SET RELATIVE PRESSURE
VALUE
1. Press and hold the
[ BARO ]
key for 2 seconds to enter unit setting mode.
2. Use
[UP]
or
[DOWN]
key to change the unit between inHg / mmHg / hPa.
3. Press
[ BARO ]
key to the relative pressure value setting mode
4. Press
[UP]
or
[DOWN]
key to change the relative pressure value.
5. Press
[BARO]
key to save and back to ABS or REL mode that you selected before.
NOTE:
- When power up the console, it will display the relative pressure reading and default value is 1013 hPa (29.91
inHg), which refers to the average atmosphere pressure.
- When you change the relative atmospheric pressure value, the weather indicators will change along with it.
- The relative atmospheric pressure is based on the sea level, but it will change with the absolute atmospheric
pressure changes after operating the clock for 1 hour.
RAIN
1. Rain alert indicator
2. Rainfall reading indicator
3. Reading
4. Rain rate indicator
5. Unit of measure
TO SELECT THE RAINFALL DISPLAY MODE
The device displays how many mm or in of rain are accumulated in an hour time period, based on current
rainfall rate. Press the
[ RAIN ]
key to toggle between:
-
RATE
Current rain rate in past an hour
-
HOURLY
The reading indicate total rainfall from last hour
-
DAILY
The reading indicate the total rainfall from midnight
-
WEEKLY
The reading indicate the total rainfall from the current week
-
MONTHLY
The reading indicate the total rainfall from the current calendar month
-
TOTAL
The reading indicate the total rainfall since station was powered up
TO SELECT THE MEASUREMENT UNIT FOR THE RAINFALL
1. Press and hold the
[ RAIN ]
key 2 seconds to enter unit setting mode.
2. Use
[ UP ]
or
[ DOWN ] key
to toggle between
mm
(millimeter) and
in
(inch).
3. Press the
[ RAIN ]
key to confirm and exit.
TO CLEAR THE RAIN RECORDS
During installation of the wireless 7-IN-1 sensor, the sensors were likely to be triggered, resulting in erroneous
rainfall and wind measurements. After the installation, user may clear out all the erroneous data from the
console, without needing to reset the clock and re-establish pairing. Simply follow the below step to clear out
the rain data that recorded before.
Содержание 7003100 000 000
Страница 21: ...21...
