17
◎
About Running Screen
◎
Turn Off the Power
Screen display will be toggled to operation display.
setting change is not possible while the unit is in operation.
Short-cut
The unit stores the last setting when the power is turned off.
To use the same setting as last time, press [▼] setting button while turning on the power
switch, it will short-cut to the final confirmation screen.
Operation time is set assuming use of alkaline batteries.
With manganese batteries, Ni-MH rechareable batteries, the correct
operation time is not displayed. Also, even alkaline batteries, there are
individual difference depend on the type and condition, so please use the
display time as a reference
For the operation mode display, [ONE WAY] or [SWING] is displayed to the
right of [TIMELAPSE]
The backlight turns off automatically.
To turn the backlight on again, press setting button
→ to change backlight time, refer to the page 7 and change the setting.
To turn off the power of the unit, turn off the power switch.
Also, to change the setting while the unit is in operation, turn off the power.
Then, turn on the power switch and change setting.
UKCA Declaration of Conformity
Bresser UK Ltd. has issued a „Declaration of Conformity“ in accordance with
applicable guidelines and corresponding standards. The full text of the UKCA
declaration of conformity is available at the following internet address: www.
bresser.de/download/4964130/UKCA/4964130_UKCA.pdf
Bresser UK Ltd.
•
Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6Hf, Great Britain
S E T T I N G
H I G H
F I N I S H
?
<
− −
Y E S
− −
>
T < < = >
4 8 h
3 6 0 d e g
R U N N I N G
2 0 h
T I M E L A P S E
O N E W A Y
4 8 h / 1 R
< =
3 6 0 d e g
0 h
0 m 0 s
R U N N I N G
2 0 h
T I M E L A P S E
O N E W A Y
4 8 h / 1 R
< =
3 6 0 d e g
0 h
0 m 0 s
Current Status
→
← Operation Time/
External Power Supply (USB)
Running Mode
→
Elapsed Time
→
Setting
→
After preparation is completed, press [SET]
button to complete the settings.
To return to the previous setting, press [▼] of
setting button.
Press [◀] [▶] of setting button to select [NO]
and press the [SET] button will return to the
first mode selection screen.
Manual_4964130_PM-100-Astro-Photo-Mount_en_BRESSER_v102021a.indd 17
Manual_4964130_PM-100-Astro-Photo-Mount_en_BRESSER_v102021a.indd 17
12.10.2021 15:23:29
12.10.2021 15:23:29
