5
CAUTION: Add liquids first and do not overfill the product or operate it when empty.
3.
Insert the Glass Jar to the Motor Base turn until the slots lock in place.
4.
Add the lid with the Filler Cap in place.
Note: The Filler Cap allows you to add ingredients while blending.
5.
Connect Plug to the nearest 120 V AC electrical outlet.
6.
Pulse your beverage to the consistency and speed of your preference.
Note: Push the Hi/Low Button for Speeds 1-6, and leave the button out for High
Speeds 7-12
Attention: First use may cause a slight odor or small smoking upon heating, it is
normal. This is a result of the heating element chemical reaction. It quickly goes
away.
7.
When you have finished blending, press the pulse/off button. Make sure the
blades have come to a complete stop before attempting to remove the jar from
the base. Turn the Jar counter clockwise to remove from the base.
8.
Lift Jar from base remove the lid and serve.
Blending Tips:
Filler cap should only be removed to add ingredients. Do not remove the lid while
the blender is in use.
Large foods should be chopped before placing into blender.
If the mixture is very thick try adding some liquid and pulsing to a thinner
consistency.
While the appliance is OFF you can use a rubber spatula to scrape the sides of the
jar. Make sure you removed all utensils before continuing replace the Lid and blend.
The Lid cap holds up to 60 ml of liquid and can be used to measure when adding
ingredients.
Please do not use your blender to make Bread Crumbs, Grinding Coffee Beans, and
Chopping Nuts, Whipping Cream, Beating Egg whites, Mixing Dough, Mashing
Potatoes, Grinding Meats or Extracting Juice.
When using the Pulse function use short bursts. Allow the blades to stop completely
between pulses. Do not Pulse for more than 2 minutes.
It is recommended to begin blending at a low speed and gradually increasing if
necessary.
If you will blend warm ingredients still steaming, remove the filler cap covering the
opening with a cloth to avoid splattering and blend only on the lowest speed. This
allows any steam to escape.
Do not blend any of the following products in your blender:
o
Large pieces of Frozen Food.
o
Raw Turnips, Sweet Potatoes, Potatoes
o
Bones
o
Hard Meats
o
Boiling Liquids (allow to cool for 5 minutes)
