www.brennenstuhl.com
8
TECHNICAL DATA
Type designation
X 8050 M/X 8051 M X 8002 M
X 12050 M/X 12051 M X 12002 M
Power socket
DE/F
CH
DE/F
CH
Output
80 W
80 W
120 W
120 W
Nominal voltage
220 - 240 V AC
50/60 Hz
220 - 240 V AC
50/60 Hz
220 - 240 V AC
50/60 Hz
220 - 240 V AC
50/60 Hz
Power factor
0.9
0.9
0.9
0.9
Mains current
0.34 A
0.34 A
0.52 A
0.52 A
IP, IK
IP 54. IK 08
IP 54. IK 08
IP 54. IK 08
IP 54. IK 08
Protection class
I
I
I
I
Connection cable
5m H07RN-F 3G1.5 5m H07RN-F 3G1.5 5m H07RN-F 3G1.5
5m H07RN-F 3G1.5
Loading capacity socket
max. 3400 W
max. 2000 W
max. 3400 W
max. 2000 W
Operational temperature range
-20°C – +50°C
-20°C – +50°C
-20°C – +50°C
-20°C – +50°C
Size
31 x 31 x 9.7 cm
31 x 31 x 9.7 cm
31 x 31 x 10.4 cm
31 x 31 x 10.4 cm
Weight
3.7 kg
3.7 kg
4.15 kg
4.15 kg
Maximum projected area
0.096 m²
0.096 m²
0.096 m²
0.096 m²
This product is suitable for indoor and outdoor lighting purposes.
OPERATION
Setting up and turning on the light
Place the light on a dry, flat surface. Only use the light with the bracket
A
extended. The adjustable bracket
A
can be
adjusted to several levels and can be used to set the light at different tilt angles.
Mounting the light on a tripod
The light can be mounted on a suitable tripod using the holes on bracket
A
(mounting material not included!).
Make sure the tripod is sufficiently stable and the light is securely mounted.
Switching and Dimming the light
Switch on the spotlight with the switch
B
on the back.
The light intensity can be adjusted in steps and continuously:
Steps dimming:
by pressing the switch twice, 100 and 50% light can be adjusted.
Stepless dimming:
press the switch permanently – the light intensity is slowly reduced.
Proceed in the same way to increase the intensity again.
If the switch is left in any of its “on” positions for longer than 3 seconds, then pressing it once again will always turn it off.
20P128 Mobiler LED Strahler X 0533235 210908.indd 8
20P128 Mobiler LED Strahler X 0533235 210908.indd 8
08.09.2021 17:35:24
08.09.2021 17:35:24
