brennenstuhl Jet Light 38 W IP 54, Инструкция по эксплуатации

Страница: 18 / 104

18
Instructions manual Jet Light 38 W/55 W IP 54
5.1.5 To re-assemble the worklamp, place the cover in its original position and put the
rubber protection over the cover. Then screw the cover back on with the 4 screws.
(Fig. 17).
Fig. 17
5.2 Changing the starter
5.2.1 Follow the instructions in 5.1.1 and 5.1.2 to open the cover then make sure you use a
starter with a capacity between 5W and 65W.
5.2.2 Remove the used starter: Turn the starter in a clockwise direction and pull it out of
its holder. (Fig. 18).
Fig. 18
5.2.3 Insert the new starter: Press the starter in the starter holder and turn it in a
clockwise direction. (Fig. 19 and 20).
Fig. 19 Fig. 20
5.2.4 Assembling the worklamp according to 5.1.2 .
Attention!
After assembling the worklamp, make sure the cover is stable and is completely enclosed
by the rubber protection so that water cannot penetrate and damage the lamp.
IP54
PCE
1050
IP54
PCE
1050
Starter
IP54
PCE
1050
IP54
PCE
1050
067507 Jet Light 17.12.2007 21:23 Uhr Seite 18