4
D
Operating Instructions
Mobile LED Light
DINORA
Please note: Please read these instructions carefully prior to mounting the light and store them
in a safe location afterwards!
TEcHNIcAL SpEcIfIcATIONS:
Type of protection:
IP 65 (dust-tight and splash-proof)
Protection class:
II
Nominal voltage:
100 – 240 V~ 50/60 Hz
Operating temperature:
-20°C – +40°C
Maximum projected area: 0.09 m
2
Mounting height:
max. 3 m
Type
Power consumption
Dimension (mm)
Weight (kg)
Power factor
Current
DINORA 3000
24 W
278 x 213 x 86
1.2
>0.9
0.09 - 0.25 A
DINORA 5000
47 W
363 x 278 x 98
2.3
>0.9
0.2 - 0.5 A
pROpER INTENDED uSE:
This high-power LED light is suitable for indoor and outdoor lighting purposes.
The LED light is supplied ready for connection with connecting cable and plug.
Schuko plugs may only be plugged into sockets of protection class IPX4 in humid environments/
outdoors. BS and Swiss connectors may only be used in dry environments/indoors, as they are
not splash-proof.
OpERATION:
Setting up and turning on the light
Place the light on a dry, level surface. Only use the lamp with the arm extended. The continuously
adjustable arm can be used to set the lamp at different tilt angles. The light can be turned on and
off using the switch on the back.
Mount the lamp on a tripod
The lamp can be mounted on a suitable tripod with the help of the holes on the mounting bracket
(mounting materials not included!). Make sure the tripod is sufficiently stable and the light is
permanently mounted. Please strictly observe the above-mentioned max. mounting height!
SAfETy NOTES:
1. Prior to commissioning, make sure the right voltage is available.
2. Prior to each use, make sure the light and mains supply cable are not damaged in any way.
Never use the lamp if you find damage.
caution! A damaged light or mains supply cable pose a risk to life due to electric shock!
3. Do not use this light without properly attached gaskets!
BA_17P085 Mobiler LED Strahler DINORA 3000 / DINORA 5000 0497068/4317.indd 4
25.10.17 10:39
