EN
11
Wireless flush-mount ON / OFF actuator 868.3 MHz
Wireless flush-mount ON / OFF actuator 868.3 MHz
The range in buildings may vary greatly from open areas. In addition
to the transmission power and the reception characteristics of the
receivers, ambient conditions, e.g. humidity in addition to the structural
conditions on site, are important factors.
The range can be significantly reduced in part due to:
• wood, gypsum, concrete, reinforced concrete walls
• proximity to metal and conductive objects
• broadband interference, e.g. in residential areas (DECT phones,
mobiles, wireless headphones, wireless speakers, wireless weather
stations, baby monitors)
• proximity to electric motors, transformers, mains adapters, computers
Duty Cycle
Duty cycle refers to a transmission time limit regulated by law for
devices transmitting in the 868 MHz range. It is intended to ensure
smooth operation of devices operating in the 868 MHz range. The
maximum transmission time of each device is 1 % of an hour
(corresponding to 36 seconds / hour). Once the 1 % limit has been
reached it cannot transmit until the time limit of the duty cycle has
ended, so after one hour.
Included in delivery
1 x Wireless flush-mount ON / OFF actuator
1 x Quick start guide
1 x Instructions for use (digital, available for download)
Technical data
Product designation:
UPOS 868 01 W1000 3726
Item no.:
1294720
Radio frequency:
868.3 MHz
Frequency:
868.1 - 868.5 MHz
Max. transmitting power: < 20 mW
Duty cycle:
< 1 % per h
Supply voltage:
230 V / AC, 50 Hz
Max. switching capacity: 1000 W
Power input:
< 1 W
Ambient temperature:
0 °C to 35 °C
Protection type:
IP00
Open area range:
approx. 100 m
Dimensions (W x H x D): 52.1 x 52.1 x 25.5 mm
Weight:
42 g
Subject to technical changes without notice.
Device overview
Front
Pair button
Device LED
Back
L
External conductor
connection L1 230 V
phase input
Switched external conductor
L1 230 V phase (consumer)
N
Neutral conductor
connection N 230 V
(consumer)
N
Neutral conductor connection
N 230 V input
Function
The wireless flush-mount ON / OFF actuator is part of the Brennenstuhl
Home Automation Systems BrematicPRO, which is controlled via app
or the BrematicPRO PC software. The wireless flush-mount ON / OFF
actuator can be directly connected and controlled with the BrematicPRO
wireless remote control. It can be directly linked with the Brennenstuhl
Home Automation Systems BrematicPRO via the BrematicPRO Gateway
to use other software-based functions (e.g. timer control, theme
control, astro function).
For information on which components are compatible with the wireless
flush-mount ON / OFF actuator, please visit: www.brematic.com/en/service.
For additional information on components, please refer to the instructions
for use of the respective BrematicPRO wireless component.
