EN
13
Wireless motion sensor 868.3 MHz
Wireless motion sensor 868.3 MHz
Drill the marked holes using a suitable drill and insert the dowels.
Note:
When installing on a wood surface, use a 1.5-2 mm drill.
You will not require any dowels.
Screw the installation plate to the wall using the screws provided.
Press the motion detector onto the installation plate until it
audibly clicks into place.
Download app / PC software BrematicPRO
The Brennenstuhl Home Automation System BrematicPRO is controlled
via the BrematicPRO app/PC software. The app can be downloaded
for free from the App Store and Google Play. The PC software is available
for download at www.brematic.com/gb/service.
For more information about the app and how to use it, please visit
www.brematic.com/gb/service.
Pairing the motion detector to the
BrematicPRO Gateway
When linked with the Home Automation System BrematicPRO via the
BrematicPRO Gateway, it is possible to use software-based functions
with the aid of the app/BrematicPRO PC software. After the sensor
has been triggered, actions (tasks) can be triggered via the app / PC
software. For example, a wireless switch actuator can be switched on
or an email can be sent.
The app or BrematicPro PC software is installed and open.
The BrematicPRO Gateway is ready for use.
Keep the device at least 50 cm from the Gateway.
Open the “Settings“ menu.
Select the room where you wish to use the device.
Select “Add Device“.
Select the frequency “868 MHz“.
Under “New Device“, select “Sensor / Detector“ and click “Continue“
to confirm your selection.
Follow the on-screen instructions.
Press and hold the pair button on the device for 3 seconds.
Enter a device name, e.g. “Living Room Motion Detector“.
Select “Add“ to assign the device to the room.
First tap “Back“ to leave the room, then “Done“ to complete the
pairing process.
The motion detector is now connected to the Home Automation
Systems BrematicPRO.
Find more information about the app and how to use it at:
www.brematic.com/gb/service
Cleaning the Device
Clean the device with a dry, lint-free cloth. For tough dirt, you
may also slightly dampen the cloth.
Do not clean with solvent-based cleaners. These could damage
the device surface and markings.
Never immerse the device in water or other liquids. The device
may otherwise be damaged.
Action
Problem
Possible cause
Action
The device will not
function.
The battery is empty. Insert a new battery.
The motion detector
is not reporting any
motion
The wrong operating
mode has been
selected.
Check the / /
mode.
Check the detection
range.
The device is outside
the Gateway range.
Reduce the distance
to the Gateway.
The motion
detector is triggered
undesirably.
Sudden temperature
changes in the room.
Change the / /
mode.
Change the
installation location.
Disposal
The packaging is made from environmentally-friendly
materials which can be disposed of through your local
recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please dispose of the
product properly when it has reached the end of its
useful life, not in the household waste. Please contact
your municipality for information on collection facilities
and their opening hours.
Faulty or drained batteries must be recycled in accordance with
Directive 2006/66/EC and its amendments. Return batteries and / or
the device to the provided recycling facilities.
