brennenstuhl 1172660, Руководство по эксплуатации

Страница: 15 / 68

Power Jet-Light 4 x 36 W IP 54
Operating Manual 15 Status: 7201S-07-2007_K
-
Regularly check the work lamp for damages.
-
The work lamp must be separated from the mains voltage in order for it to be replaced. Pull the
connector from the socket.
-
Repairs should be carried out only by authorized personnel.
-
Let the work lamp cool down before touching it (for example during replacement of the illuminant).
-
Observe a minimum distance of 50 cm on each side to combustible materials.
-
Damaged cable line cannot be replaced. The work lamp is to be disposed appropriately.
-
Never switch multiple shockproof sockets one after the other.
-
Note the secure status of the work lamp.
4 Device overview
Below is a brief overview of the control panel and display of the device and a short functional description.
Pos. Name Pos. Name
1 Retaining bracket 7 Connector
2 Protective shield bolts 8 Supply wiring
3 Protective shied 9 Adjusting screw (Quick release fastener)
4 Illuminant 10 Stirrup bolt
5 Socket 11 Rubber lip
6 Standing bracket
7
1
2
4
5
6
3
8
9
10
11