brennenstuhl 1 17260 0, Руководство по эксплуатации

Страница: 16 / 52

Power Jet-Light 2 x 36 W IP 54
Operating Manual 16 Status: 7201S-07-2007_K
7 Cleaning
Pull the main plug before cleaning. Due to reasons of the electrical security, the device is to be cleaned
with a dry or damp cloth. Please do not use any sharp cleaning material or chemicals (solvents, petrol
etc) and no rough sponges. Never dip the working lamp in water.
8 Waste disposal
The product should not be disposed in normal domestic waste at the end of its lifetime. Please enquire
with your city or municipal administration on possibilities of environmentally compatible and appropriate
disposal of the device.
9 Error list
Error Possible reason(s) Remedy
An illuminant is not shining
anymore There is a defect in the illuminant Replace illuminant
Work lamp is not functioning
-
Defective power supply or
network cable
-
No network connection
-
Switch is defective
-
Check the earthed
230 V~ socket.
-
Check the extension cable
IMPORTANT:
All further repairs should be carried out only by professionals.
10 Guarentee and Service
We guarantee 2 years for this item.
Repairs are to be conducted only through the authorized specialized dealers.
Damages due to inappropriate handling, non-observance of the operating manual as also replacement
parts (For example illuminant) are exempted from the guarantee.
Service address: Hugo Brennenstuhl GmbH & Co. KG, Seestraße 1-3, D-72074 Tübingen
Telephone: +49(0) 7071-8801-0
Fax: +49(0) 7071-87657
11 Declaration of Conformity
The CE-sign was applied in conformance with the following European directives:
73/23/EWG Low voltage directive
89/336/EWG EMV- Directive
The declaration of conformity is lodged with the manufacturer.
Manufacturer:
Hugo Brennenstuhl GmbH & Co. KG, Seestraße 1-3, 72074 Tübingen, Germany