Bremont AC I, Технические заметки

Страница: 4 / 41

BREMONT AC I
AUTOMATIC CHRONOMETER
Your Bremont watch shows you the time in hours, minutes and seconds,
and the date. The mechanical movement with automatic winding has a
free-swinging rotor that keeps the mainspring wound via the motion of
your wrist. The movement in your BREMONT AC I has 25 jewels, runs at
28,800 bph and has a 38-hour power reserve once fully wound. The watch
is water resistant to 100m (10ATM) and the dial is protected by a dual anti-
reflective sapphire crystal that is retained securely in the case.
To ensure that this rather special watch continues to run beautifully for
years to come you must follow a few important operating instructions...
wINdINg ThE wATCh
Your BREMONT AC I can be wound from crown position I by rotating
the crown in a clockwise motion. The movement will automatically start
with just a few revolutions of the rotor, however it is better to wind the
movement fully with 30-40 revolutions of the crown. By doing this you
will achieve maximum accuracy and have a power reserve of 38-hours,
even when the watch is not on your wrist.
ChANgINg ThE sTRAP
RemovIng a stRap
Use the end of your watch tool to
carefully lever the spring bar out
of the lug.
FIttIng a stRap
Place one end of the spring bar
into the hole in the lug and use the
end of the watch tool to lever the
other end into position.