Page 2
_______________________________________________________________________________
Installing the motor
Attach the crown and wheel to the motor and place the clip on the shaft of the motor so that the wheel
is fixed to the motor.
Install the motor with the motorbracket on the product and take care that it is secured.
Place the motor in the tube of the roller/shutter.
(These assemblies are usually already done in the factory)
Adapter
_________ Wheel
_______________________________________________________________________________
Setting the end limits of the motor
To determine where the motor must stop, you must use the supplied adjustment pin.
The large arrow indicates in which direction you change the end limits.
By turning to the
Plus
or
Minus
you can change the end limits.
By turning to the
Plus
, the motor will make more rotations.
By turning to the
Minus
, the motor will make les rotations.
The setting needs to be done for both directions of rotation.
If the motor is stopped by it selves, do not make more than one rotation to the
Minus
.
This can disrupt the adjustment.
