background image

Rev 06131 

 

Brehon Agrisystems Inc. is not responsible or liable for indirect, special, or consequential damages arising out of or in 
connection with the use or performance of the product or other damage with respect to any economic loss, loss of 
property, loss of revenue or profit, or costs of removal, installation, or reinstallation. 

 

G. Force  

   

Remote Control Systems 

 

INTEGRATED RECEIVER/ENDGATE and 
HOIST DRIVER CONTROL MANUAL 

 

The 

G.  Force

 Remote Control is designed to provide the ultimate in convenience and safety to 

perform tasks remotely. It is a radio frequency (RF) controlled device that allows operation of a 
gate, chute, etc. from a hand held transmitter operated remotely. The Transmitter, which operates at 
418 MHz FM, transmits encoded information to the Receiver, which then decodes the information 
and performs the desired function. When coupled with motor/driver, this system may be used to 
operate a swinging gate, raise a chute, open a valve, etc. The Transmitter and Receiver are designed 
to operate within 300' but actual range is dependent on operating environment. 
 

Features : 
 

 

Simplicity of design and quality of engineering. 

 

User selectable security code. 

 

Power On/Off switch on Receiver. 

 

LED Indicator lights. 

 

9v Transmitter Battery 

 

Ease of installation/removal. 

 

All controls can be by either Manual Keypad or Remote Control 

 

 

Multiple Transmitters can operate a single Receiver. 

 

Multiple Receivers can be operated by a single Transmitter. 

 

Up to 4 different Channels can be operated by one Receiver  

 

Manufactured By: 

Brehon Agrisystems Inc. 

    102 

– 

2750 

Faithfull 

Ave. 

  

 

Saskatoon, SK   S7K 6M6 

 

 

 

    (306) 

933 

2655 

phone/fax 

 

   

  

   Email: 

[email protected] 

 

Web: 

www.brehonag.com

  

 

 
 

 

 

 

 

Содержание G. Force












Отзывы: